1. Impeller kit replacement
The maintenance of the IPS system should be carried out regularly. For the sake of safety, the boat should be out of water and stand-alone with stable mounting for safety issues to facilitate the work. The purpose of removing the leaves of the propeller is to check whether there will be rubbish, fish shreds, or rope entering the IPS. If the IPS is blocked by such things, then that may cause seawater to enter the IPS. Regular inspection and cleaning of the IPS can help avoid this situation.
2. Impeller kit replacement
The engine needs regular maintenance to enable the engine to exert its highest performance. One of the engine maintenance procedures is to replace the impeller, impeller is probably damaged by aging or external forces, and the debris generated by the impeller may block the cooling system of the engine and cause the problem of excessive water temperature.
3. Replacement of fuel / water separator filter insert
Fuel / water separator housing
The pre-fuel filter requires to be replaced regularly. The function of the pre-fuel filter is to leach water from the oil to ensure that the oil entering the engine is moisture-free. In addition, the pre-fuel filter compartment will produce stains in daily use, so it also requires to be cleaned. If it is not cleaned regularly, the oil circuit will be blocked.
4. Engine Repowering Project
5. Engine Service on board
6. Generator Inspection on site
